Author Topic: no default or ui  (Read 8622 times)

Offline Red-Erik

  • Newbie
  • *
  • Posts: 3
no default or ui
« on: 2013/12/06, 09:14:35 am »
Hi all,
newby hwere, so forgive simple questions but I really don't know how to overcame
this error when I boot from USB prepared according to
http://www.supergrubdisk.org/put-rescatux-into-an-usb-pendrive-as-an-isolinux-from-windows/

Unknown keyword in configuration file U┐U┐

Tnx u all.

Red.
« Last Edit: 2013/12/06, 10:41:29 am by Red-Erik »

Offline adrian15

  • Administrator
  • Hero Member
  • *****
  • Posts: 833
  • Please test Rescatux and report back feedback...
    • El blog de adrian15
Re: no default or ui
« Reply #1 on: 2013/12/06, 13:05:57 pm »
Are you using an old version of YUMI?

Try with the last one. You will need to format (lose your data) your pendrive because the new YUMI is not the same as the old YUMI.

Anyway tell us which version you are using because a new YUMI beta has been released recently.

adrian15
If you have liked this piece of advice please consider donating to the Super Grub Disk project.

Offline Red-Erik

  • Newbie
  • *
  • Posts: 3
Re: no default or ui
« Reply #2 on: 2013/12/06, 17:35:03 pm »
YUMI-1.9.9.7B but I tried now with rescatux_cdrom_usb_hybrid_i386_amd64-486_0.31b5_sg2d and now it works !!  :D
I suppose that rescatux_cdrom_usb_hybrid_i386_amd64-486_0.30.2_sg2d has some bug or that it's not compatible
with Yumi-1.9.9.7B
Tnx a lot and regards.

Red.

P.S. I restored Grub and now Linux starts correctly but I lost Windows 7 (unable to boot in any way)  :(

Offline adrian15

  • Administrator
  • Hero Member
  • *****
  • Posts: 833
  • Please test Rescatux and report back feedback...
    • El blog de adrian15
Re: no default or ui
« Reply #3 on: 2013/12/06, 17:45:49 pm »
YUMI-1.9.9.7B
The last version then. Ok.
but I tried now with rescatux_cdrom_usb_hybrid_i386_amd64-486_0.31b5_sg2d and now it works !!  :D
I suppose that rescatux_cdrom_usb_hybrid_i386_amd64-486_0.30.2_sg2d has some bug or that it's not compatible
with Yumi-1.9.9.7B
It's explained in documentation that you have to use: rescatux_cdrom_usb_hybrid_i386_amd64-486_0.30.2 or rescatux_cdrom_usb_hybrid_i386_amd64-486_0.31b5. Not the filenames that end in _sg2d.

It might work for you because I emailed on this subject to Yumi developer (I still have to check that though) but, as I say, you have to do what the documentation says.

Do you have any suggestions so that I make it more clear in the documentation?
Tnx a lot and regards.

Red.
You are welcome.

P.S. I restored Grub and now Linux starts correctly but I lost Windows 7 (unable to boot in any way)  :(
Please open a new thread because it is a completely different question.

adrian15
If you have liked this piece of advice please consider donating to the Super Grub Disk project.